home *** CD-ROM | disk | FTP | other *** search
/ Tech Arsenal 1 / Tech Arsenal (Arsenal Computer).ISO / tek-20 / yaesu.zip / FT727.MOD < prev    next >
Text File  |  1989-06-05  |  2KB  |  44 lines

  1. YAESU FT-727R
  2.  
  3. Modification for extended coverage. (This will work for both the
  4. old and new CPU versions)
  5.  
  6.     -Remove the battery pack
  7.  
  8.     -locate the RAM backup switch according to your manual ( this
  9.      will be the switch FARTHEST away from the battery terminals)
  10.  
  11.     -Turn the switch off, count to 4, then turn it back on
  12.  
  13.     -Relace the battery pack
  14.  
  15.     -Turn the rig on. The readout should be entirely blank. If it
  16.      is not, you probably did not wait long enough before turning
  17.      the    switch back ON, so repeat the above procedure.
  18.  
  19.     -Type in the following:  ' 001111 '
  20.  
  21.     -The rig should now come to life.  You will have to reprogram
  22.      all  the  memories as well as the repeater splits  for  both
  23.      bands.  The display will now cover 100-199,  400-499MHz, but
  24.      it  obviously won't work over this range.  Mine covers  139-
  25.      153,  420-460.
  26.  
  27.      - The reset code is in your manual
  28.  
  29. [ From another source:
  30. The factory code to make
  31. the program from the factory is ( 443300 ) and if you enter those
  32. digits the talkie will return to normal again. However if you enter the
  33. code ( 601111 ) you will notice the talkie will come up in a different
  34. mode you can and must input 5 digits instead of 4 to input a freq.
  35.  
  36. Example in the normal mode to get freq 147.06 you would enter 7060 then
  37.         hit the dial button.
  38.  
  39.         In the expanded mode you would enter 47060 to get the 147.06 cause
  40.         your display now takes and controls the last 5 digits of a freq
  41.         instead of the normal 4.
  42. ]
  43.  
  44.